Publicidad
Idiomas disponibles
Idiomas disponibles
Driving instructions
4. DRIVING INSTRUCTIONS
4.1. Application areas
4.1.1. Designated use
The attachment is equipped with two grip arms that are
used to carry the material. Transport the material as low as
possible. The main application area is the handling of:
•
round bales
•
square bales
Lower the loader as far as possible when moving. Keep
in mind that the higher you lift the loader, the higher the
centre of gravity, resulting in increased risk of the tractor
overturning.
4.1.2. Fitting
The implement is either supplied complete or partially
assembled.
With partial assembly the attachments and hoses are
supplied in separate kits.
Fixing kit.
Fit the loader fixing as shown.
Hose kit.
Connect the hose to the cylinder.
The hose connected to the cylinder's (+) is marked in red.
The hose connected to the cylinder's (-) is marked in blue.
The loader should be equipped with a double-acting oil
return on the implement attachment.
Warning!
When installing the hoses, check that these
are long enough and that they do not get stuck
between the tool carrier, the loader beam or the
links. If necessary, adjust the couplings.
Fig.15 Fixing kit.
Fig.16 Hose kit.
12
Publicidad
