Quicke Unigrip 130 Instrucciones De Montaje página 9

2. SAFETY INSTRUCTIONS
2.1. General information
Driver safety is one of the most important matters when
a new implement is designed. The designer builds in as
many safety functions as possible. Several accidents occur
every year which could have been avoided by taking a
few seconds of consideration, and through more careful
operation of the implement.
Avoid personal injury. Read the following personal safety
instructions and insist that everybody who works with you,
or for you, also complies with the instructions.
2.1.1. Warning decals
Warning decals are fitted in different locations on the
attachment. Locate, read and find out what the decals mean
before loader and implement are used.
• Do not cover or remove any of the warning decals. If a
warning decal is missing or illegible, replace it with a
new decal. New warning decals are available from your
dealer.
2.2. Explanation of warning levels
When you see the safety symbol and the signal words on
decals or in the instruction manual, the instructions MUST
be followed since they are related to your own personal
safety.
11136514
MAX 200 bar
60018712
Product
XXXXXXXXXXXXXXXXXXXX
Type
XXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXXX
Ref.No. Serial No.
EuroTest Made by
Ålö AB XXXXXXXXXX XXXXXXX
Certificate
Umeå Sweden
Date Weight
Made in Xxxxxxx xxxxxxxxxx
XXXXXXX kg
XXXXXXXXXX/XXXXXXX
Fig.4 Location of warning decals and machine plate.
Fig.5 Locate, read and find out what the decals mean before
the loader and implement are used.
7
Safety instructions
60051165