Quicke Unigrip 130 Instrucciones De Montaje página 16

Driving instructions
4.2.2. Open/close the implement -
EasyDrive LCS and ElectroDrive LCS
To open and close the implement, use the third hydraulic
function which is controlled by switch F2.
When the lever is moved to the right (5) the implement is
opened, and when moved to the left (4) the implement is
closed (right-hand fitting).
Note. When the switch for the third hydraulic service is
released then the control immediately returns to the dump/
roll back function.
4.2.3. Open/close the implement -
ErgoDrive LCS/ErgoDrive
To open and close the implement, use the third hydraulic
function which is controlled with a switch (A) on the front
of the joystick control.
When the lever is moved to the right (5) the implement is
opened, and when moved to the left (4) the implement is
closed (right-hand fitting).
The movements are reversed for left-hand fitting.
Note. When the switch for the third hydraulic service is
released then the control immediately returns to the dump/
roll back function.
4.2.4. Opening/closing the implement -
ElectroDrive CDC
To open and close the implement, use the third hydraulic
service which is controlled by switch P2.
When the lever is moved to the right (5) the implement is
opened, and when moved to the left (4) the implement is
closed (right-hand fitting).
The movements are reversed for left-hand fitting.
When the switch for the third hydraulic service is released
then the control immediately returns to the dump/roll back
function.
4.2.5. Open/close the implement - Hose
kit
Hose kit - tractor Joystick, see the instruction manual for
the tractor.
F2
Fig.20 Open/close the implement - EasyDrive LCS and
ElectroDrive LCS
A
Fig.21 Open/close the implement - ErgoDrive LCS/ErgoDrive
P2
Fig.22 Opening/closing the implement - ElectroDrive CDC
14
5 4 4 5
5 4 4 5
0307
5 4 4 5
0308
0413