Create HATTORI STUDIO Manual Del Usuario página 8

K E E P WAR M
When you switch the kettle on, press
temperature (40 °C to 100 °C), and leave for 3 seconds. After that the water will start
heating. Once the water reaches the target temperature, the buzzer will buzz, and the ma-
chine will stop heating and start keeping the water warm. Press
programme.
1. Before cleaning, always unplug the appliance. Never rinse or immerse the kettle or base unit
in water. Just wipe with a damp cloth, using no abrasive detergents. Occasionally rinse out
the kettle with clean water.
2. Cleaning the heating element - superficial spots of rust may appear on the base unit. Re-
move with a stainless steel cleaning agent.
3. We recommend removing limescale regularly, depending on water hardness. Fill the kettle
with water and a limescale remover, according to the product instructions. Do not boil the
solution as it may foam over. Afterwards, rinse kettle thoroughly with fresh water.
PROBLEM
The appliance switches off before
boiling.
The appliance doesn't switch off.
The appliance cannot be switched on.
PAC K AG IN G MATE RI AL S
The packaging materials are environmentally friendly and can be recycled. The plastic compo-
nents are identified by markings, e.g.>PE<, >PS<, etc. Please dispose of the packaging materi-
als in the appropriate container at your local waste disposal facility.
In compliance with Directives: 2012/19/EU and 2015/863/EU on the restriction of the use of dangerous substances in elec-
tric and electronic equipment as well as their waste disposal. The symbol with the crossed dustbin shown on the package
indicates that the product at the end of its service life shall be collected as separate waste. Therefore, any products that
have reached the end of their useful life must be given to waste disposal centres specialising in separate collection of
waste electrical and electronic equipment, or given back to the retailer at the time of purchasing new similar equipment,
on a one for one basis. The adequate separate collection for the subsequent start-up of the equipment sent to be recycled,
treated and disposed of in an environmentally compatible way contributes to preventing possible negative effects on the
environment and health and optimises the recycling and reuse of components making up the apparatus. Abusive disposal
of the product by the user involves application of the administrative sanctions according to the laws.
E NGL I SH
8
and press
CLEANING
TROUBLESHOOTING
POSSIBLE CAUSE
Too much limescale on the heating
element of the kettle.
After operating with little or no
water, the appliance has not cooled
down sufficiently.
DISPOSAL
to select the desired
to stop the keep warm
SOLUTION
Remove the limescale.
Close lid until it locks. Insert
the mesh filter correctly.
Allow to cool a short time
and try again.