Publicidad
Idiomas disponibles
Idiomas disponibles
GB
Installation
When installing the seat in the front vehicle seat make sure the
backrest of the vehicle seat is in an upright position.
Use ISOFIX+Belt
1. Position the seat inside the vehicle. Squeeze and pull the ISOFIX
release buttons to release the ISOFIX attachements. (fig.2) The ISOFIX
attachements lock only in the position where it is totally extended.
2. Click the ISOFIX attachements to the ISOFIX anchorage points in the
vehicle seat (fig.3). Make sure that all ISOFIX indicators are GREEN.
(fig.4) Push the seat as far as possible towards the backrest of the
vehicle seat.
3. Slide the shoulderbelt in the shoulderbelt guide. (fig.5) Make sure the
belt is not twisted.
Use Belt Only
1. If the seat cannot be used in combination with ISOFIX anchorage
points in the vehicle seat, the ISOFIX attachements can be stowed
inside the seat and the seat can be used in combination with the 3-point
belt only.
2. Position the seat inside the vehicle. Slide the shoulderbelt in the
shoulderbelt guide. (fig.5) Make sure the belt is not twisted.
Positioning of the child
1. Adj)ust the headrest to the correct height by squeezing the Height
adjuster. (fig.6) The headrest must be adjusted so that there is a space
2. The seat can be positioned in 2 positions by sliding out the reclining
Handle at the bottom of the base. Position the seat in the correct
position before positioning the child with the vehicle belt. (fig.8)
3. Position the vehicle belt in front of the child and lock the belt into the
buckle of the vehicle.(fig.9)
Removing the seat
1. Remove the shoulderbelt out of the shoulderbelt（fig.10）
2. Squeeze the ISOFIX release button to release and pull back the ISOFIX
attachements. (fig.11)
3. Remove the seat from the vehicle.
Removing and refitting the cover
.• Do take care when you remove the cover, as re-fitting the cover
is the reverse process.
• Start to take off the backrest part first and re-fit the backrest part
as the last part.
• For washing instructions, see the washcare label at the inside of
the fabric cover.
Guarantee
• Should this product prove faulty within 24 months of purchase
due to materials or manufacturing fault, except covers, please
return it to the original place of purchase.
• The guarantee is only valid when you use your seat appropriately
and with care. Please contact your retailer, they will decide if the
seat will be returned to the manufacturer for repair. Replacement
or return cannot be claimed. The guarantee is not extended
through repair.
• The guarantee expires when there is no receipt, when defects are
caused by incorrect or improper use, when defects are caused by
abuse, misuse or negligence.
Manufacture: Ningbo Safetech Child Products Co., Ltd.
Address: Yinjiaken Village, Shangtian Town, Fenghua 315111
Ningbo China (PRC)
GB
Publicidad
