Verefa V60 Pro Manual De Usuario página 19

◉
Auto-Empty dirt
- Auto emptying :
- After cleaning, the robot will return to the charging base, and the robot will automatically
empty the dust box according to the emptying frequency set in the app.
- The emptying frequency can be adjusted in the app.
- Manual emptying :
- When the robot is connected to the charging base, you can press the recharge button of the
robot or remote control to start manual emptying.
Note :
- If auto emptying is not needed, disable this feature in the app.
4.2 Network functions
◉
Reset Wi-Fi
- If your mobile phone cannot connect to the robot (such as
configuration or password change of your router), try to
reset the Wi-Fi and reconnect to the network.
- Press and hold both buttons (
and Recharge button) for 3 seconds until you hear the
voice prompt. The three indicators flash slowly, indicating
that the robot is ready for pairing.
- For detailed Wi-Fi setup instructions, refer to "Installation >
Connect to mobile client" in this manual.
◉
Mobile client functions
- You can remotely control your robot through the mobile application.
- With the app, you can access more features such as schedule cleaning, find the robot, review the
status and cleaning records.
- For specific Wi-Fi setup instructions, refer to "Installation > Connect to mobile client" in this
manual.
Note :
- Due to continuous development and upgrading of the app, functions and details may be slightly
adjusted. Please refer to the actual version.
+
Spot Cleaning button
017