Verefa V60 Pro Manual De Usuario página 21

2
Place the magnetic boundary strip flat on the floor. Use
an adhesive tape if it needs to be fixed.
Note :
- Ensure that the magnetic boundary strip is placed
flat and on the same surface of your robot.
- If the magnetic boundary strip is rolled up, remove
and then re-apply on the floor with adhesive tape.
Otherwise the boundary strip may not work well.
- This function can only be used to divide the area,
not to block any dangerous area.
- Do not place the magnetic boundary strip under
any thick carpet, otherwise the robot vacuum
cleaner may not recognize the boundary strip.
019