Verefa V60 Pro Manual De Usuario página 20

4.3 Other functions
◉
Find my robot
- If your robot is stuck somewhere, you can find it through the "Find my Robot" function in the app.
◉
Force restart system
- When the button does not respond or cannot be turn off, please try to restart the system.
- When not being charged, press and hold the power button for 10 seconds to force turn off, and
then press and hold the power button for 3 seconds to turn on.
◉
Restore factory settings
- If the system cannot be used normally after resetting, please try to restore the factory settings.
- When not being charged, press and hold both the power button and the recharge button for 8
seconds at the same time until you hear the prompt tone.
- The robot will clear all information and settings. At this time, the user needs to reconfigure the
settings (including the network settings).
◉
Magnetic boundary strip (sold separately)
- With the magnetic boundary strip, the robot
can identify and avoid entering a specific
area. For example, place the magnetic
boundary strip in front of the door to prevent
the robot from entering a room, or place the
boundary strip around any pet drinking basin,
toy area or complex wires to prevent the robot
from crossing in.
1
Identify the area to be isolated with magnetic boundary
strip. Cut the boundary strip to a shorter length. Be sure to
correctly measure the length before cutting. Keep a
distance of at least 5cm from the separated items and
areas to avoid your robot crossing over and touching them.
018
Magnetic boundary strip