Verefa V60 Pro Manual De Usuario página 22

5. Maintenance and Troubleshooting
5.1 Routine maintenance
Please turn off and unplug the power cable before cleaning and maintaining the product.
For best performance, refer to the following table for routine maintenance.
Parts
Dust box
Filter
Roller brush
Roller brush cover
Side brush
Caster Wheel
Wheel
Sensors
Charging contact pins and
charging contacts
Dust bag
Charging base filter
Charging base dirt port
Charging base air duct
Note :
- If pets are kept, the frequency of parts maintenance should be increased to twice per cycle.
- The replacement frequency may vary depending on the actual situation. If visible or
abnormal wear occurs, replace the parts.
1) Clean dust box and the filter
1 Press the dust box release button to take out the dust box.
2
Open and empty the dust box.
- Use a cleaning brush to gently clean the inner cavity of dust box, the front filter of the dust
box cover, the Auto-empty dirt port and the Auto-empty dirt port cover.
3 Close the dust box cover, press the filter cover buckle to open the filter cover, and take out the
filter.
4 Thoroughly flush the dust box and filter with clean water.
Completely dry the dust box and filter and replace them.
5
Maintenance frequency
Monthly
Weekly
Monthly
Monthly
Monthly
Monthly
Monthly
Monthly
Monthly
Monthly
Monthly
Monthly
In case of blockage
020
Replacement frequency
-
Every 3 months
Every 6-12 months
Every 3-6 months
Every 3-6 months
-
-
-
-
Every month
-
-
-