Publicidad
Idiomas disponibles
Idiomas disponibles
10. Hold the upper end cap again and tighten the lock nut to 60-84 inch lbs.
(6.8-9.5 Nm).
11. Reconnect the suppressor lead and push in until the tabs click.
12. Coat any open suppressor holes with Liquid Neoprene to prevent water from
entering.
13. Install a new plastic tie around the fuel pump body and electrical leads.
14. Reconnect the fuel inlet line and tighten securely.
15. Install the pump guard if removed.
16. Remove the fuel spill container.
17. Reconnect the battery cables.
18. Start the engine and check for fuel leaks.
LIMITED LIFETIME WARRANTY
LIMITED LIFETIME WARRANTY AVAILABLE AT SIERRAPARTS.COM/EN-US/
SUPPORT/WARRANTYSTATEMENTS. IF YOU HAVE QUESTIONS, OR TO OBTAIN
A COPY OF THE LIMITED WARRANTY FREE OF CHARGE, CONTACT:
DOMETIC MARINE US CORPORATION
LITCHFIELD DIVISION
1 SIERRA PLACE
LITCHFIELD, IL 62056-3029
877-663-8396 (OPTION 1)
2
Electric Fuel Pump
EN
Publicidad
