Care and Maintenance
Care and Maintenance Instructions
To keep your robot running at peak performance, perform the procedures on the following pages.
EN
Part
Bags
Charging Contacts
Visual Docking Target
Blower Cover inside canister
Bin
Filter
Full Bin Sensor
Front Caster Wheel
Edge-Sweeping Brush and
Multi-Surface Brushes
Sensors and Charging Contacts
Mopping pad
Wick cap
Note:
iRobot manufactures various replacement parts and assemblies. If you think that you need a
replacement part, please contact iRobot Customer Care for more information.
* Replacement frequency may vary. Parts should be replaced if visible wear appears.
6
For more information, visit global.irobot.com
Care Frequency
-
Once every month
Once every month (remove debris
from blower cover)
Wash bin as needed
Clean once a week (twice a week if
you have a pet). Do not wash
Clean every 2 weeks
Clean every 2 weeks
Clean once a month (twice a
month if you have a pet)
Clean once a month
Clean after a mopping job
Replace if dirty or shows wear
Replacement Frequency*
Bags should be replaced when
prompted by the LED indicator/app.
-
-
-
Every 2 months
Every 12 months
Every 12 months
-
After 30 washes
-
Emptying the Bin
1
Press bin release button to remove bin.
2
Open bin door to empty bin.
3
Place bin back in the robot.