Using your Roomba Robot Vacuum
Positioning the Clean Base Automatic Dirt Disposal
Good Wi-Fi
coverage
®
0.3 m (1 ft)
above
1.5 ft (0.5 m)
both sides
4 ft (1.2 m)
in front
Download the iRobot Home App and connect to Wi-Fi
• Follow the step-by-step instructions to set up your Roomba Robot Vacuum.
• Set an automatic cleaning schedule and customise cleaning preferences.
• Create smart maps to tell your robot where, when and how to clean.
Note:
Do not place your
Clean Base in direct sunlight.
Ensure that the area
around the dock is free of
4 ft (1.2 m)
clutter to improve docking
from stairs
performance.
WARNING: To prevent the
risk of your robot falling
downstairs, ensure that the
Charging Station is placed
at least 1.2 metres (4 feet)
*Objects are not to scale.
away from stairs.
Charging
• Place the robot on the Clean Base to activate the
battery.
• If your robot needs to recharge mid-clean, it will return
to its Clean Base. Once it is sufficiently charged, it will
then resume the cleaning job where it left off.
• The robot uses a small amount of power whenever it is
on the Clean Base. You can put the robot in a further-
reduced power state when not in use. For instructions
®
and more details on this Reduced Power Standby Mode,
refer to the iRobot Home App.
• For long-term storage, turn off the robot by removing
it from the Clean Base and holding down
10 seconds. Store the robot in a cool, dry place.
White light ring while charging
Solid white: fully charged
Pulsing white: charging
Pulsing red: charging/low
Note:
Your robot comes with a partial charge, but
we recommend that you charge the robot for 3
hours prior to starting the first cleaning job.
Roomba
i5+ Owner's Guide
®
EN
for
3