Descargar Imprimir esta página

FONESTAR MIX-8PRO Manual De Usuario página 5

Publicidad

Idiomas disponibles

Idiomas disponibles

PLAYER: volume slider from the player to the MAIN MIX final mix.
i.-
j.-
MAIN MIX (L-R): volume sliders for the left (L) and right (R) channels of the MAIN MIX final mix.
k.- RETURN VOL: volume control of the RETURN input.
l.-
PHONES VOL: volume control of the PHONES
m.- Left (L) and right (R) channel signal level indicators of the MAIN MIX output signal level (dB).
An adequate signal level will cause the green indicators to light up, and the yellow indicators to
light up in a timely manner. If the yellow indicators light up for an extended period of time, the
output signal level should be reduced. The red indicators should not light up, if this happens you
should reduce the output signal level to avoid damage to the equipment.
n.- PHANTOM +48V: phantom power for the XLR connectors of the input channels. It must be
activated when the microphone to be connected is a condenser microphone.
o.- PHANTOM +48V: phantom power activation indicator light.
p.- REC: button to start a recording or playback of recorded files.
AUDIO RECORDING: with the REC mode selected press the rotary control (
and the counter on the display will start to increment indicating that recording has started. Press
the rotary control (
When a recording is finished, playback of the recorded files will start in pause mode. Control the
playback of these recordings with the rotary control on the player:
-
: turn anti-clockwise to skip to the previous recording.
-
: turn clockwise to skip to the next recording.
-
: press the control to start or pause the playback of the recordings.
q.- MODE: a short press allows you to change the mode of the player.
r.-
Integrated player controls:
-
: turn counterclockwise to skip to the previous song.
-
: turn clockwise to skip to the next song.
-
: press the control to start or pause playback.
s.
USB port for playback of audio files from a USB device or cable connection to a PC.
PC CONNECTION: by connecting a USB cable from this port to a PC, the PC will detect the mixer
as an input and output device. That is, you can send audio to the PLAYER channel and receive the
MAIN MIX audio on the PC as long as you have the PC mode selected on the player.
) to pause the recording or long press the REC button to end the recording.
PC
PROGRAM
PHANTOM
MODE
+48 V
REC
monitor output.
- 5 -
EN
) to start recording

Publicidad

loading

Este manual también es adecuado para:

Mix-12pro