Publicidad
Idiomas disponibles
Idiomas disponibles
4. Position the left lower stiffener inside
the right lower stiffener for the desired
width setting.
5. Place two carriage bolts through the
assembly and finger tighten each nut.
Assembling Upper Stiffener
1. Locate the following parts and hard-
ware:
16 Carriage Bolts 5/16-18 x 5/8
16 Hex Flanged Nuts 5/16-18
4 Upper Stiffeners (one with logo)
2. Position the upper stiffener inside the
leg/lower stiffener assembly at the
required setting.
3. Place two carriage bolts through each
hole as shown and finger tighten each
nut.
All manuals and user guides at all-guidesbox.com
Hex Flanged Nut
11
5/16-18
Upper Stiffener
Carriage Bolts
5/16-18 x 5/8
Publicidad
