Hillrom Ultrafins Stirrups O-UFAS Instrucciones De Uso página 17

INSTRUCTIONS FOR USE
3.4.2 Removal Instruction:
a. Loosen boot-clamping mechanism slide boot along rod until top end (calf
portion) of boot is approximately at patient's mid-calf. Tighten clamp.
b. Ensure patient's heels are securely Removed in the heels of the boots.
c. Use both hands to support and adjust boot to desired position. loosen clamping
mechanism securely.
d. Open boot pad and Remove an Allen Safety Drape over each leg to permit
continuous monitoring of leg position during procedure.
3.5 Troubleshooting Guide:
This device does not have a troubleshooting guide. For technical support user of
the device shall first contact Hill-Rom Technical Support.
3.6 Device Maintenance:
Make sure that all labels are installed and can be read. Replace labels as
necessary by using a plastic scraper to remove the label. Use an alcohol wipe to
remove any adhesive residue.
Contact Allen Medical Systems, Inc. if you need to repair or replace the device
contact us using the information from the contact details section (1.3).
4 Safety Precautions and General Information:
4.1 General Safety Warnings and Cautions:
WARNING:
a. Do not use if product shows visible damage.
b. Prior to using this device, please read the instructions for equipment set up and
use. Familiarize yourself with the product before application on a patient.
c. To prevent patient and/or user injury and/or equipment damage, examine the
device and surgical-table side rails for potential damage or wear prior to use. Do
not use the device if damage is visible, if parts are missing or if it does not function
as expected.
d. To prevent patient and/or user injury and/or equipment damage, verify the
device attaching clamps completely touch the table-side rails and are firmly in
place. Test the locking mechanism to ensure no movement when elevated or
pushed.
Document Number: 80024545
Version D
Page 17
Issue Date: 06 MAR 2020
Ref Blank Template: Ver. F