Publicidad
EN
NOTE:
TO MAINTAIN THE BEAUTY OF THE PRODUCT
SURFACE AND AVOID UNWANTED STAINS (HAIR
DYE, INK, LIPSTICK AND OTHER COLOURING
MATTER) WE STRONGLY RECCOMEND THE
IMMEDIATE REMOVAL OF DIRT.
THE WATER TEMPERATURE FOR CLEANING THE
SHOWER STALL BASIN SHOULD NOT EXCEED
75°C.
AVOID ANY BATH CLEANING PRODUCTS THAT
CONTAIN NATURAL OR ARTIFICIAL DYES, TEST
PRODUCT ON AN INCONSPICUOUS AREA
BEFORE USING.
IMPROPER USE MAY DAMAGE PRODUCTS AND
INVALIDATE THE WARRANTY.
IN ORDER TO AVOID SCRATCHES, THE SURFACE
OF THE SHOWER TRAY SHOULD BE PROTECTED
DURING ITS INSTALLATION.
RECOMMENDA
1.
For regular cleaning use of universal cleaning
agents with nonabrasive properties, or any mild
for gloss surfaces.
2.
After each use the inner surface must be rinsed
with water and cleaned with a cotton cloth.
3.
If necessary, we recommend using a natural
stone impregnation on the outside of the shower
tray to maintain and extend the aesthetically
pleasing appearance of the product.
4.
Stronger dirt (grease, mildew, oil, paint or ink
stains) must be treated with warm water and
gentle cleaning agents or a soap solution with
water.
5.
Never use any abrasive cleaners. If any product
then it is not safe to use on your gloss product.
25
6.
Small scratches can be removed by using a
polishing paste.
7.
Scratches on the surface may be treated with
abrasive paper soaked in water. First try a 1500
grit paper, then if needed try a 3000 grit paper.
Afterwards, the surface may be polished with a
8.
Limescale may be treated with a solution of
water
and vinegar.
Publicidad
