Publicidad
Idiomas disponibles
Idiomas disponibles
EL- Skyport Transceiver For Wireless Triggering – Setup
The EL-Skyport on / off, Group, Frequency Channel and the Power Steps Per Push can be
customised.
EL-Skyport on / off
Press the flash power up-down buttons together to enter into the "Advanced Feature Setup"
Display shows
r.0
r.1
r.2
After 3 to 4 seconds the settings are saved automatically and the display shows the flash power
setting.
Group Settings
Press the flash power up-down buttons together to enter into the "Advanced Feature Setup".
Then, scroll to G.1 using the Prop/Free button.
Display shows
G.1
G.2
G.3
G.4
After 3 to 4 seconds the settings are saved automatically and the display shows the flash power
setting.
Frequency Channel Settings
Press the flash power up-down buttons together to enter into the "Advanced Feature Setup".
Then, scroll to F.1 using the Prop/Free button (only use in cases of interference with other systems).
Display shows
F.1 to F.8
After 3 to 4 seconds the settings are saved automatically and the display shows the flash power
setting.
Power Steps Per Push
Press the flash power up-down buttons together to enter into the "Advanced Feature Setup"
Then, scroll to i.1 using the Prop/Free button.
Display shows
i.0
i.1
i.2
i.3
i.4
i.5
After 3 to 4 seconds the settings are saved automatically and the display shows the flash
power setting.
14
Change settings with the flash power up-down buttons
EL-Skyport off
EL- Skyport on
EL-Skyport speed mode (only available with EL-Skyport Speed)
Select Group with the flash power up-down buttons
Group 1 (standard setting)
Group 2
Group 3
Group 4
Change the Channel with the flash power up-down buttons
Select Frequency Channel from 1 – 8.
Note: The transmitter must have the same Frequency Channel
setting. Standard setting is Frequency Channel 1.
Select values with the flash power up-down buttons
+/- 1f-stop
+/- 1/10 (standard setting)
+/- 2/10
+/- 3/10
+/- 4/10
+/- 5/10
English
Publicidad
Capítulos
Solución de problemas
