VOX electronics KG 2610 Manual De Uso página 44

Reverse Door
Tool required: Philips screwdriver, Flat bladed screwdriver, Hexagonal spanner.
y
Ensure the unit is unplugged and empty.
y
To take the door off, it is necessary to tilt the unit backwards. You should rest the unit on something solid so that
it will not slip during the door reversing process.
y
All parts removed must be saved to do the reinstallation of the door.
y
Do not lay the unit flat as this may damage the coolant system.
y
It's better that 2 people handle the unit during assembly
1. Remove four screws in top cover and then lift it.
2. Unscrew top hinge and then remove upper door and place it on a soft pad
to avoid scratch.
3. Remove the pin with a screwdriver and flip the hinge bracket. Then refit
the pin to hinge bracket.

unscrew
180°