Panasonic Lumix DMW-FL360 Instrucciones De Funcionamiento página 18

∫
Concerning the flash modes
Item
[TTL AUTO]
[AUTO]
[MANUAL]
[FP TTL AUTO]
[FP MANUAL]
¢ The guide number (GN) is a value which indicates the light quantity of a
flash. The higher the value, the greater the quantity of light emitted by the
unit.
≥
You may not be able to use some modes depending on the type of digital
camera.
(±: Available, —: Not available)
DMC-L1K
DMC-FZ50
≥
It is not possible to select a mode which cannot be used.
18
VQT1B11
After measuring the appropriate flash intensity by
discharging a pre-flash, the unit fires again for photo
taking. (P19)
The unit senses the light by its flash sensor in
accordance with the aperture of the lens, and it
adjusts the flash intensity. (P20)
≥
This mode can be used only for digital camera
models with communication functions which
support the [AUTO] mode.
The unit fires at the guide number (GN)
been set. (P21)
This mode enables flash photo taking even at the
high shutter speeds of the digital camera by FP firing
(repeatedly firing the flash at high speed). (P22)
The unit initiates FP firing at the flash intensity set in
the [FP MANUAL] mode. (P23)
[TTL AUTO] [AUTO]
Details of settings
[MANUAL]
±
±
¢
which has
[FP TTL [FP
AUTO] MANUAL]
—