Panasonic Lumix DMW-FL360 Instrucciones De Funcionamiento página 24

∫
Adjusting the flash intensity
The flash intensity can be adjusted in
steps.
Set the flash intensity adjustment to
[ON] before adjusting the flash
intensity. (P38)
≥
[ ] appears on the display
panel.
1 Turn the select dial and set
the flash intensity
adjustment value.
A
A: Flash intensity adjustment value
≥
The flash intensity adjustment
value is always displayed except
when it is [0].
≥
The flash working range displayed
is for when the flash intensity
adjustment value is [0].
24
VQT1B11
≥
You cannot adjust the flash
intensity when the guide number is
at the highest or lowest value.
The flash intensity adjustment
range and the actual flash
intensity may differ depending on
the flash mode.
≥
Flash intensity adjustment range
≥
If [TTL AUTO], [AUTO] or [FP
TTL AUTO] is selected, the
flash intensity can be adjusted
over a range of d3.0 steps.
0 +0.3
0 -0.3
≥
If [MANUAL] or [FP MANUAL] is
selected, the flash intensity can
be adjusted over a range of
d0.7 steps.
0 +0.3
0 -0.3
+0.7 +3.0
-0.7 -3.0
+0.7
-0.7