Siemens SIMATIC PN/MF Coupler Manual De Instrucciones página 9

ATEX-/UKEX device intended for use in hazardous area
If the product is intended for use in a potentially explosive atmosphere (gas/air or gas/dust mixture), observe the special
documentation (
information in the
(e.g. ATEX zone, degree of protection, temperature class) is indicated on the product (in the declaration of conformity and
usually also on the nameplate).
NOTE
As a rule, country-specific requirements for the operator also apply when a product is used in a potentially explosive
atmosphere (e.g. Directive 1999/92/EC for the EU).
Cleaning
If you need to clean the product, use dry ESD cleaning cloths (observing the protective measures for ESD).
Requirement: All supply voltages present on the device are switched off. Observe the five safety rules for working in and on
electrical installations.
Maintenance and repair
The product is maintenance-free. Repairs to the product may only be carried out by the manufacturer.
Recycling and disposal
For environmentally sustainable recycling and disposal of your electronic waste, contact a company certified for the disposal
of electronic waste. Dispose of the product in accordance with the applicable regulations in your country.
Accessories
You can find information on the approved accessories in the
(
https://support.industry.siemens.com/cs/ww/en/view/109781406
2 Security information
Siemens provides products and solutions with industrial security functions that support the secure operation of plants,
systems, machines and networks.
In order to protect plants, systems, machines and networks against cyber threats, it is necessary to implement – and
continuously maintain – a holistic, state-of-the-art industrial security concept. Siemens' products and solutions constitute one
element of such a concept.
Customers are responsible for preventing unauthorized access to their plants, systems, machines and networks. Such systems,
machines and components should only be connected to an enterprise network or the internet if and to the extent such a
connection is necessary and only when appropriate security measures (e.g. firewalls and/or network segmentation) are in
place.
For additional information on industrial security measures that may be implemented, please
(
https://www.siemens.com/industrialsecurity
Siemens' products and solutions undergo continuous development to make them more secure. Siemens strongly recommends
that product updates are applied as soon as they are available and that the latest product versions are used. Use of product
versions that are no longer supported, and failure to apply the latest updates may increase customers' exposure to cyber
threats.
To stay informed about product updates, subscribe to the Siemens Industrial Security RSS Feed
(
https://www.siemens.com/cert
Compact Operating Instructions
A5E52571352-AB, 06/2023
https://support.industry.siemens.com/cs/ww/en/view/109781406
)
.
)
.
documentation
)
.
)
. The intended use
visit
visit
9