Manhattan 180948 Instrucciones página 4

Setup
1 Unlock unit door(s) and open them.
2 To fit a larger device, remove an appropriate slot divider. Push the divider to the back of the cabinet and
lift it up. Replace a divider by placing it into the slot and pulling it toward you.
3 Connect devices to power outlets with appropriate cables. Secure cables vwith wire clips on dividers.
• Connect power cables to power outlets, feeding cables through holes on back panel.
• Load devices in bays.
• Connect cables to devices.
Charging
Connect the power cord to the unit and a power outlet. Devices begin to charge automatically.
4
English
1
2
1
3
Instructions