Voltr GTJ250WAC Manual Del Usuario página 35

INSTALLATION INSTRUCTIONS
1
Assemble the middle part (4) and the lower part
(7) of your-edge cutting, using the screws pro-
vided, taking care that the food is not damaged.
2
The handle is equipped with a cable support (2) which is used to secure the use of an extension. You
must make a loop with the electrical extension, pass it in the hook.
30/03/2023
2
1
Turn your protective housing (8), as shown in
step 1. Then screw using the screw (step 2).
2
EN
35