Publicidad
Idiomas disponibles
Idiomas disponibles
EN
TECHNICAL CHARACTERISTICS
Number of Vacuum Rotations of the
Engine
Protection class
Weight
cutting width
Recovery box /
Cutting height adjustment /
Sector voltage
NOISE AND VIBRATIONS
The noise and vibration values are given according to the standard EN 60335..
Acoustic pressure level LPA
Uncertainty K
Level of acoustic intensity measured LWA
Level of acoustic intensity guaranteed
LWA
Uncertainty k wa
Vibratory emission value Ah
The actual level of vibrational emissions may differ from the value indicated in this manual
To exactly estimate the load by vibrations for a certain working time, it is also necessary to take
into account the time of stopping or empty walking of the device. This can cause a significant
reduction in the load volume by vibrations on the total working time.
To prevent blood circulation disorders from the hands caused by vibrations, it is necessary to
Try to reduce vibrations as much as possible. As a measure to reduce vibrations, we can cite the
wearing of gloves when using the tool and the limitation of working time.
40
WARNING :
according to the type and mode of use.
WARNING!
take breaks in work.
10,000 TRO/MIN
II
1,2 kg
220mm (nylon wire Ø1.2mm)
/
/
230 to 240V ~ /50Hz
82,9 dB (A)
3 dB (A)
92.2dB
96 dB (A)
1.5 m/s2
1,91 m/s2
30/03/2023
Publicidad
