Introduction; Safety; Safety And Responsibility - SOMFY Ramp RTS-HR1 Manual De Instrucciones

Installation guide
1. Introduction
2. Safety
2.1 Safety and responsibility
3. Installation
3.1 Contents of the kit
3.2 Equipment required
3.3 Installation recommendations
3.4 Safety distances
3.5 Installing the Heating Mod/Var Ramp
RTS-HR1
4. Wiring
5. Commissioning
5.1 Programming the RTS control point
6. Operation
6.1 With a Mod/Var range RTS control point 36

1. Introduction

The Heating Mod/Var Ramp RTS-HR1 is a radiant heating ramp which heats up immediately offering
optimum performance and directional heating. The Heating Mod/Var Ramp RTS-HR1 is fitted with
Somfy RTS Radio Technology.
The electric heating ramp uses heating lamps with a maximum output of 2000 W with a 230 V supply.
The Heating Mod/Var Ramp RTS-HR1 can be operated via an RTS control point.
The Heating Mod/Var Ramp RTS-HR1 can be used to select 3 different levels of heating:
• The heating lamp heats to 33% power,
• The heating lamp heats to 66% power,
• The heating lamp heats to 100% power.
The Heating Mod/Var Ramp RTS-HR1 can be used to program one of these 3 heating levels in the
"favourite position". The factory default setting for the favourite heating level is 33% of the maximum
power level.
The Heating Mod/Var Ramp RTS-HR1 is used:
- as an individual control - one Heating Mod/Var Ramp RTS-HR1 is controlled by one control
point,
- as a multiple control - one Heating Mod/Var Ramp RTS-HR1 is controlled by several control points
(maximum of 12 control points),
- as a group control - several Heating Mod/Var Ramp RTS-HR1s are controlled from a single
control point,
- This device is not designed to be used by persons (including children) whose physical, sensory or
mental capacity is impaired, or persons with little experience or knowledge, unless they are under
supervision or have received instructions on use of the device by a person responsible for their safety.
Children should be supervised to ensure they do not play with the device.

2. Safety

2.1 Safety and responsibility

Before installing and using this product, please read the installation guide carefully.
Moreover, the installer must comply with current standards and legislation in the country in which the
product is being installed, and inform his customers of the operating and maintenance conditions for
the product.
Any usage outside of applications defined by Somfy constitutes non-compliance, and is therefore not
covered by the guarantee. In this event, as for all usage not consistent with the instructions given
here, Somfy declines any responsibility for harm or damage.
Never begin installing without first checking the compatibility of this product with the associated
equipment and accessories.
The equipment must not be used without the protective grille: danger of burns!
Do not look directly at the infrared tube close up or for a long period when the ramp is on!
Copyright © 2008-2010 Somfy SAS. All rights reserved.
Contents
33 6.2 With an RTS Chronis type control point 37
6.3 With another RTS control point
33
7. Optional additional settings
33
7.1 Modifying the "My" favourite heating level 38
34
7.2 Adding/Removing RTS control points
34
7.3 Creating multiple or group controls
34
8. Tips and recommendations
34
8.1 Problems with the Heating Mod/Var Ramp
34
RTS-HR1?
8.2 Replacing a lost or broken control point 40
34
8.3 Restoring the original configuration
36
9. Technical data
36
36
36
Heating Mod/Var Ramp RTS-HR1
37
38
38
39
39
39
40
40
33