System Q; Audio Control; Audio Setup - Kenwood KDC-1028 Manual De Instrucciones

Reproductor de discos compactos receptor de fm/am
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

System Q

You can recall the best sound setting preset for
different types of music.
1
Select the source to set
Press the [SRC] button.
2
Select the Sound type
Press the [Q] button.
Each time the button is pressed, the sound
setting switches.
Sound setting
Natural
Rock
Pops
Easy
Top 40
Jazz
• "USER": The values set on the <Audio Control> (page
9). When the System Q setting is changed, the
Bass, Middle, and Treble set in audio control
replace the System Q values.
• Each setting value is changed with the <Speaker
Setting> (page 10).
First, select the speaker type with the Speaker setting.

Audio Control

1
Select the source for adjustment
Press the [SRC] button.
2
Enter Audio Control mode
Press the [VOL] knob.
3
Select the Audio item for adjustment
Press the [VOL] knob.
Each time the knob is pressed, the items that can
be adjusted switch as shown below.
4
Adjust the Audio item
Turn the [VOL] knob.
Adjustment Item
Display
Bass level
"BAS"
Middle level
"MID"
Treble level
"TRE"
Balance
"BL"
Fader
"FD"
Display
"FLAT"
"ROCK"
"POPS"
"EASY"
"TP40"
"JAzz"
Range
–8 — +8
–8 — +8
–8 — +8
Left 15 — Right 15
Rear 15 — Front 15
5
Exit Audio Control mode
Press any button.
Press the button which is not [VOL] knob and
[ATT] button.

Audio Setup

Setting the Sound system, such as Volume offset
and Loudness.
1
Select the source for adjustment
Press the [SRC] button.
2
Enter Audio Setup mode
Press the [VOL] knob for at least 1 second.
3
Select the Audio Setup item for adjustment
Press the [VOL] knob.
Each time the knob is pressed, the items that can
be adjusted switch as shown below.
4
Adjust the Audio setup item
Turn the [VOL] knob.
Adjustment Item
Display
Volume offset
"V-OF"
Loudness
"LOUD"
• Volume offset: Each source's volume can be set as a
difference from the basic volume.
• Loudness: Compensating for low and high tones
during low volume.
When it's ON, "LOUD" indicator is ON.
5
Exit Audio Setup mode
Press the [VOL] knob for at least 1 second.
Range
–8 — ±0
ON/OFF
9
|
English

Publicidad

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

Kdc-128Kdc-128cr

Tabla de contenido