Operation; Safety Notes; Warning And Safety Instructions - INDUSTRIAS TECHNOFLEX Super II Manual De Instrucciones

1.1

Safety Notes

This manual contains CAUTIONS and WARNINGS which must be followed to prevent the possibility
of improper service, damaged to the equipment, or personal injury. Read and follow all the
CAUTIONS and WARNINGS included in this instructions manual.
WARNING:
1.2

Warning and Safety Instructions

When using electric tools, basic safety precautions should always be followed, to reduce the
risk of fire, electric shock, and personal injury.
1.Never operate motor with damaged or worn
electrical cords! When using and extension
cord be sure to use one heavy enough to carry
the current load. See Table 1.8-1 for correct
cable size to use.
2.Prevent body contact with grounded surfaces,
such as pipes, metal railings, radiators and
metal ductwork.
3.When motor is used outdoors, use only
extension cords intended for and marked for
outdoor use.
4.Always keep power cord away from heat, oil
and sharp edges which can damage it.
INGLÉS
Warnings warn of conditions or practices which
could lead to personal injury.
WARNING
Read All Instructions!
Guard against electric shock!
Save these instructions!

OPERATION

5.Make certain motor is in good working order
and properly grounded before starting, as
well as the connection plug where this will
be connected.
6.In any case it will be able to modify the
structure of the connector, it can cause
electric shocks.
7.They won't be able to be used lower any
concept adapters
homologated, faulty or lacking ground
connection or of a capacity (A.) inferior to
the suitable one in this manual..
1B
that they are not
1B-2
15