Cleaning Instructions
First Time Use
1. Wash grids by hand with water and mild dish soap to remove
any residue from the manufacturing process. DO NOT wash in a
dishwasher.
2. Rinse thoroughly with hot water and dry completely with a soft cloth
to prevent moisture from entering the cast iron.
Cast Iron Grids
• Season your grids to add a protective coating to prevent corrosion
See Grilling Tips – How to Season your Cast Iron Cooking Grids.
Stainless Steel Grids
• Stainless steel cooking grids can be cleaned by preheating the grill
and using a wire brush to remove residue.
• Stainless steel grids will permanently discolor from regular use
because of high temperatures when grilling.
Inside of the Grill
1. Remove the cooking grids.
2. Use a brass wire brush to clean loose debris from the sides and
underneath the lid.
3. Scrape the sear plates with a putty knife or scraper. Use a wire brush
to remove the ash.
4. Remove the sear plates and brush debris from the burners with a wire
brush.
5. Sweep debris from inside the grill into the drip pan.
Porcelain Enamel
Avoid chipping or scratching the porcelain coat on the sear plates and drip
pan, as this might compromise corrosion resistance. Use plastic putty
knives or scrappers when cleaning porcelain parts.
WARNING! Always wear protective gloves and safety glasses when cleaning your grill.
WARNING! Accumulated grease is a fire hazard.
WARNING! Cleaning should only be done when the grill is cool to avoid the possibility of
burns.
Napoleon.com | Freestyle
®
Series Grills
!
13
Cleaning |