Descargar Imprimir esta página

Clatronic AKKU-SAUGER AKS 827 Manual De Instrucciones página 9

Aspiradora con batería
Ocultar thumbs Ver también para AKKU-SAUGER AKS 827:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 19
Problem
The appliance is without function.
Weak suction power.
The battery rechargeable does not
hold a charge.
Technical Data
Model: ...................................................................... AKS 827
Net weight
(Handheld unit, power supply unit): ............... approx. 0.85 kg
Protection class (appliance): ...............................................
Protection class (power supply unit): ...................................
Rechargeable Battery: .................3 × 1.2 V, 1400 mAh NiMH
Operating time:....................................... 9 minutes maximum
Charging time: ................................................approx. 6 hours
The right to make technical and design modifications in
the course of continuous product development remains
reserved.
This appliance has been tested according to all applicable,
current CE directives and built according to the latest safety
regulations.
AKS827_IM_04.2023
Troubleshooting
Possible Cause
The rechargeable battery is empty.
The power supply unit is connected.
The rechargeable battery is defect.
The rechargeable battery is almost
empty.
The collection container is full.
The filter is polluted.
The rechargeable battery has
reached the end of its life.
Product Specifications in Accordance with
Regulation (EU) 2019 / 1782 Power Supplies
Information about
the Power Supply Used
Distributor
Clatronic International GmbH
Commercial register number HRB 9158
Industriering Ost 40, 47906 Kempen
Germany
Model identifier
Input voltage
Input alternating current
frequency
Output voltage AC / DC
Output current
Output power
Average efficiency in operation
Low load efficiency (10 %)
No-load power consumption
* not applicable due to an output power of less than 10 W.
The relevant load conditions are as follows:
Percentage of nameplate output current
Load condition 1
Load condition 2
Load condition 3
Load condition 4
Load condition 5
Load condition 6
Remedy
Charge the rechargeable battery.
Disconnect the appliance from the power
supply unit.
Contact our service or your dealer.
Charge the rechargeable battery.
Empty the collection container.
Clean the filter.
CAUTION:
Only resume operation with a dry filter!
Contact our service or your dealer.
Value
SEU006A –170025
100 – 240 V~
50 / 60 Hz
17.0 V DC
0.25 A
4.25 W
79.6 %
0.07 W
100 % ± 2 %
75 % ± 2 %
50 % ± 2 %
25 % ± 2 %
10 % ± 1 %
0 % (no-load condition)
19.04.23
Unit
* %
9

Publicidad

loading

Este manual también es adecuado para:

281044