EINHELL GE-GS 18 Li Solo Manual De Instrucciones Original página 21

•
Check your saw to ensure that it is in good
working order. If the saw fails to work properly,
have it checked. Leave all maintenance and
inspection work strictly to a qualified electrici-
an or ISC GmbH.
Do not lose these safety instructions
2. Layout and items supplied
•
Cordless tree pruning saw
•
Saw blade for wood (1x)
•
1 x battery (not included in delivery with
34.082.20)
•
1 x charger (not included in delivery with
34.082.20)
•
Original operating instructions
•
Safety instructions
2.2 Items supplied
Please check that the article is complete as
specifi ed in the scope of delivery. If parts are
missing, please contact our service center or the
sales outlet where you made bought the product
within the maximum days indicated by the con-
sumer protection laws of your country and upon
presentation of a valid bill of purchase. Also, refer
to the warranty table in the service information at
the end of the operating instructions.
•
Open the packaging and take out the equip-
ment with care.
•
Remove the packaging material and any
packaging and/or transportation braces (if
available).
•
Check to see if all items are supplied.
•
Inspect the equipment and accessories for
transport damage.
•
If possible, please keep the packaging until
the end of the guarantee period.
Danger!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, foils or small parts. There is a danger of
swallowing or suff ocating!
•
Cordless tree pruning saw
•
Saw blade for wood (1x)
•
1 x battery (not included in delivery with
34.082.20)
•
1 x charger (not included in delivery with
34.082.20)
•
Original operating instructions
Anleitung_GE_GS_18_Li_Solo_SPK8.indb 21 Anleitung_GE_GS_18_Li_Solo_SPK8.indb 21
GB
3. Proper use
The universal saw is designed for sawing wood,
iron, non-ferrous metals and plastics using the
appropriate saw blades.
The equipment is to be used only for its prescri-
bed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
4. Technical data
See warranty card of your country.
Sound and vibration
Sound and vibration values were measured in
accordance with EN 60745.
Wear ear-muff s.
The impact of noise can cause damage to hea-
ring.
Total vibration values (vector sum of three direc-
tions) determined in accordance with EN 60745.
Warning!
The specifi ed vibration value was established in
accordance with a standardized testing method. It
may change according to how the electric equip-
ment is used and may exceed the specifi ed value
in exceptional circumstances.
The specifi ed vibration value can be used to
compare the equipment with other electric power
tools.
The specifi ed vibration value can be used for initi-
al assessment of a harmful eff ect.
Keep the noise emissions and vibrations to a
minimum.
•
Only use appliances which are in perfect con-
ditions.
•
Service and clean the appliance regularly.
•
Adapt your working style to suit the appliance.
- 21 -
27.02.2018 07:55:42 27.02.2018 07:55:42