patura P 5000 Manual De Usuario página 54

Montageanleitung / Instructions de montage
Installation Instructions / Montagehandleiding
Indicaciones de montaje
Identifying faults using the indicator lights
If...
The energiser is not pulsing and the first red
indicator light is flashing...
The first red Indicator light is flashing and
other indicator lights are on...
The energiser is pulsing slowly and has a
reduced output voltage...
The warning light is flashing and the
warning buzzer is sounding...
54
This means that...
The battery connections may be faulty. Check all
battery connections. Check the battery voltage
using a multi-meter.
The energiser has a fault. If the display persists
and does not return to normal, contact your
service agent for advice.
The battery voltage may be low and the energiser
has reverted to slow speed and low output power
in order to preserve the remaining power and
energy in the battery.
The energiser has detected a sudden increase in
the load on the fence.
Switch the energiser off, locate and remedy fault
then turn the energiser on again.
For example, this may occur:
• i f a cutout switch is closed, connecting a heavily
loaded section of the fence to the energiser.
• if a branch falls on the fence.
• i f the fence or cable connecting energiser to it
experiences a sudden short to ground.
• if something becomes entangled in the fence.