Descargar Imprimir esta página

Soehnle BARI Manual Del Usuario página 11

Ocultar thumbs Ver también para BARI:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 28
Scenting
By pressing the "SCENT" (
you can switch the two scenting
functions of the Soehnle Aroma-Dif-
fuser Bari on or off.
1. Press the "SCENT" button once
to activate the constant scenting
mode. The green LED on "CONT. "
lights up.
2. The second time you press the
"SCENT" button, the scenting
mode interval is activated (scenting
takes place in 10-second intervals).
Yellow LED lights up on "10 SEC"
3. Press the "SCENT" button again to
deactivate the scenting mode. No
LED lights illuminate.
Light
By pressing the "LIGHT" (
you can switch the two lighting func-
tions of the Soehnle Aroma-Diffuser
Bari on or off.
1. Press the "LIGHT" button once to
activate the pulsating lighting.
2. The second time the "LIGHT"
button is pressed the constant
lighting is activated.
3. Press the "LIGHT" button again to
switch off the lighting.
The luminous intensity in the constant illumina­
tion mode depends on when switching on takes
place in pulsating mode.
Automatic shutoff
The unit switches off automatically
when the water tank is empty.
Cleaning
(see Figures 2.1 - 2.3)
) button,
A
WARNING: It should be noted that
high humidity can promote the
growth of microorganisms in the
environment. Microorganisms
that may be in the water or in the
environment where the unit is used
or stored may grow in the water
tank and be blown into the air. This
can lead to serious health risks if the
water is not renewed
and the water tank is
not properly cleaned
every 3 days.
Before cleaning, unplug the AC
adapter from the wall outlet and the
connecting cable from the unit.
) button,
B
• Drain residual water. (2.1)
ATTENTION!
Do not pour out residual water
through the fan opening!
• Any build-up, deposits or dirt film
• All surfaces shall be wiped dry.
• Do not use abrasive or corrosive
Failure to comply with the cleaning instructions
may have a negative effect on the function of
the unit.
Clean the water tank every 3 days
formed on the surfaces of the water
tank or internal surfaces must be
removed. (2.2)
Wipe out the water reservoir with a
cloth and cotton swab. (2.2)
cleaning agents. (2.3)
GB
9

Publicidad

loading