SGL Smarty Manual De Uso Y Mantenimiento página 24

EN
• Position a cup on the cup holder grid ❻. Make sure the
drip tray ❼ is assembled in place.
Note: adjust the height of the cup holder grid ❻ based on
the size of your cup, the regulation of the cup holder grid is
reversible.
• With the appliance ready, touch the dispensing button
(➌, ❹ or ⓫); the coffee will flow out from the coffee
nozzle.
Note: if you have a MANUAL version of the appliance, the
flow will not stop automatically, but you need to touch the
coffee button to stop coffee dispensing.
If you have an AUTOMATIC version of the appliance, the
coffee dispensing will stop automatically at the setting doses:
• Small cup: 30 ml (± 10 ml)
• Big cup: 50 ml (± 10 ml)
• Once you have made coffee always expel the capsule. Capsules are automatically expelled into the capsule
collection tray ❺ raising and lowering the handle ❶.
Note: For coffee dispensing we suggest a maximum quantity of 60 ml.
WARNING: Never open the handle ❶ during brewing cycles.
• If you want another cup, insert a new capsule for oper-
ating.
• Empty the capsule collection tray ❺ and the tank ❾ and
rinse frequently.
Note: it is advisable to open and close the handle ❶ to dis-
charge the capsule in the drawer.
Note: if the capsule collection tray ❺ is not emptied in time,
when it is emptied, it is possible for other capsules in the
channel to fall into the compartment and therefore it is nec-
essary to take care and clean the area indicated.
24
COFFEE PREPARATION
MANUAL
MANUAL
Version
version
AUTOMATIC
Version
AUTOMATIC
version
10
11
12