Publicidad
Idiomas disponibles
Idiomas disponibles
ECO FORCED AIR*
For cooking roasts and stuffed roasting joints on a
single shelf. Food is prevented from drying out excessively
by gentle, intermittent air circulation. When this ECO MODE
function is in use, the light will remain switched off during
cooking but can be switched on again by pressing
BREAD AUTO
This function automatically selects the ideal
temperature and baking time for bread. For best results,
carefully follow the recipe. Activate the function when the
oven is cold.
1. SELECT A FUNCTION
To select a function, turn the selection knob to the symbol
for the function you require: the display will light up and an
audible signal will sound.
2. ACTIVATE A FUNCTION
MANUAL
To start the function you have selected, turn the thermostat knob
to set the temperature you require.
Please note: During cooking you can change the function by
turning the selection knob or adjust the temperature by turning the
thermostat knob.
The function will not start if the thermostat knob is on 0 °C. You can
set the cooking time, cooking end time (only if you set a cooking
time) and a timer.
AUTOMATIC
To start the automatic function you have selected ("Bread"
or "Dessert"), keep the thermostat knob at the position for
automatic functions (
).
To finish cooking, turn the selection knob to position 0.
Please note: You can set the cooking end time and timer.
RISING
To start the "Rising" function, turn the thermostat knob to the
relevant symbol; if the oven is set to a different temperature,
the function will not start.
Please note: You can set the cooking time, cooking end time (only
if you set a cooking time) and a timer.
3. PREHEATING AND RESIDUAL HEAT
Once the function starts, an audible signal and a flashing
icon
on the display indicate that the preheating phase has
been activated.
At the end of this phase, an audible signal and the fixed icon
on the display will indicate that the oven has reached
the set temperature: at this point, place the food inside and
proceed with cooking.
Please note: Placing the food in the oven before preheating has
finished may have an adverse effect on the final cooking result.
After cooking and with the function deactivated, the icon
may continue to remain visible on the display even after the
cooling fan has switched off to indicate that there is residual
heat in the compartment.
Please note: The time after which the icon switches off varies
PASTRY AUTO
This function automatically selects the ideal
temperature and baking time for cakes. Activate the function
when the oven is cold.
DIAMOND CLEAN
.
The action of the steam released during this special
low-temperature cleaning cycle allows dirt and food residues
to be removed with ease. Pour 200 ml of drinking water on
the bottom of the oven and only activate the function when
the oven is cold.
* Function used as reference for the energy efficiency declaration in
accordance with Regulation (EU) No. 65 / 2014
because it depends on a series of factors such as ambient
temperature and function used. In any case, the product should be
considered to be off when the pointer on the selection knob is at
"0".
4. PROGRAMMING COOKING
You will need to select a function before you can start
programming cooking.
DURATION
Keep pressing
on the display.
Use
or
to set the cooking time you require, then press
to confirm.
Activate the function by turning the thermostat knob to the
temperature you require: an audible signal will sound and the
display will indicate that cooking is complete.
Notes: To cancel the cooking time you have set, keep pressing
until the
icon starts flashing on the display, then use
the cooking time to "00:00".
This cooking time includes a preheating phase.
PROGRAMMING THE END COOKING TIME/DELAYED
START
After a cooking time has been set, starting the function can
be delayed by programming its end time: press
icon and the current time start flashing on the display.
Use
or
to set the time you want cooking to end and
press
to confirm.
Activate the function by turning the thermostat knob to the
temperature you require: the function will remain paused
until it starts automatically after the period of time that has
been calculated in order for cooking to finish at the time you
have set.
Please note: To cancel the setting, switch the oven off by turning
the selection knob to position "
Please note: Delay to start functionality is not available for Grill
and Turbo Grill functions.
until the
icon and "00:00" start flashing
".
to reset
until the
Publicidad
