Descargar Imprimir esta página

HP All-in-One Serie Manual De Instrucciones página 10

Ocultar thumbs Ver también para All-in-One Serie:

Publicidad

Idiomas disponibles

Idiomas disponibles

Important Ink Information
To ensure that your printer functions properly, you will need to make sure that the ink valve is unlocked for printing
and locked for moving. You should also maintain proper ink levels in the ink tanks when you are printing.
Lock and unlock ink valve to control ink flow
Lock and unlock the ink valve on the front of the ink tank to control the flow of ink to the printer.
Maintain proper ink levels
Use the ink level lines on the ink tanks to determine when to fill the tanks and how much ink should be added.
Never print when any of the ink tanks has less than the minimum amount of ink. Printing with too little ink or filling
tanks with too much ink can damage the printer and affect print quality. Make sure you match the color of the ink
to the color on the ink tank when you refill an ink tank. See the Start here booklet for instructions on how to fill the
ink tanks.
Note: Product service or repairs required as a result of filling the ink tanks improperly and/or using non-HP ink will
not be covered under warranty.
10
Unlock
  
Before you print, make sure the ink valve is unlocked.
Turn valve left to vertical position to unlock.
Lock
  
To prevent ink leakage, make sure the ink valve is locked
before you attempt to move or tilt the printer. Turn valve
right to horizontal position to lock.
  
Minimum ink level
Ink level should never go below the minimum line.
Printing with ink level below the minimum line may cause
damage to your printer.
  
Maximum ink level
Do not fill ink above the maximum line. Any ink level
above the maximum line may cause ink leakage. When
you refill, some ink will be left over in the ink bottle. You
can save the remaining ink by storing the ink bottle in a
dry cool place for future refilling.

Publicidad

loading

Este manual también es adecuado para:

All-in-one deskjet gt 5810