Publicidad
Idiomas disponibles
Idiomas disponibles
Protective
guard
Guard
bracket
Abrasive disc
9"
included
Outer
flange
Inner
flange
Auxiliary handle
assembling orifice
Guard
bracket
Protection guard assembly
1. Match both cantilevered parts inside the guard bracket.
2. Turn 180° into the opposite position.
3. Fix pushing the bracket lever.
Protective
guard
1
Disc assembly
4. Fit the inner flange onto the spindle.
5. Set the disc onto the inner flange.
6. Set the outer flange onto the spindle.
7. Press the spindle lock into the grinder head.
8. Screw the outer flange with the lock nut wrench until securely fastened.
DANGER
PELIGRO
The spindle lock should only be used to change discs. Never
use the wrench to stop the disc while rotating.
6
ENGLISH
Spindle
lock
Assembly
2
Slot
Handle rotation
blocking button
Auxiliary
handle
Disc
Carbon brush
housing cap
3
Parts
Lock nut
wrench
Handle
Switch
trigger
5
5/8-11
UNC-1A
7
Spindle
lock
Protective
guard
Power supply
cable
8
6
4
Publicidad
