Thermo Fisher Scientific TSV18CPSA Instalación Y Funcionamiento página 13

9. Remove the refrigerator door stopper, and install it on the
other side of the door.
10. Remove the freezer door self-locking block and stopper.
Save them to reuse later.
11. Take out the self-locking block and stopper from the
accessory bag in the refrigerator and install on the left
side of the door.
12. Set the refrigerator door down onto the bottom hinge
(vertically), then take out the middle hinge for the other
side from the accessory bag, and assemble the middle
hinge.
13. Set the freezer door down onto the middle hinge
(vertically), then take out the top hinge and cover, attach
the top hinge, hinge cover, and hole cover.
General Purpose Refrigerators and Freezers
Be Advised
WARNING: Storage by user of any materials in
the product that may cause a deterioration of the
product shall be deemed to constitute abnormal
and improper usage of the product for purposes
of this warranty.
WARNING: Before connecting the final power
supply, check the electrical characteristics of the
unit nameplate to see that it is in agreement with
the power supplied. In addition, power should be
wired to the unit according to the electrical
schematic and all applicable codes. Only
qualified electricians should work on the
electrical portion of any unit installation.
Installation | 9