Descargar Imprimir esta página

Troy-Bilt TB25PS Manual Del Operador página 31

Motosierra de pértiga
Ocultar thumbs Ver también para TB25PS:

Publicidad

Idiomas disponibles

Idiomas disponibles

WARNING:
before cleaning or maintaining the unit. Never perform cleaning or maintenance while the
unit is running. Disconnect the spark plug wire to prevent the unit from starting accidentally.
WARNING:
serious personal injury.
MAINTENANCE SCHEDULE
Perform these required maintenance procedures at the frequency stated in the table. These procedures
should also be a part of any seasonal tune-up.
NOTE: Some maintenance procedures may require special tools or skills. If you are unsure about these
procedures, take the unit to an authorized service dealer. Refer to the Service / Warranty
Supplement for more information.
NOTE: Maintenance, replacement, or repair of the emission control devices and system may be
performed by an authorized service dealer. Refer to the Service / Warranty Supplement for more
information.
NOTE: Please read the California/EPA statement that came with the unit for a complete listing of
terms and coverage for the emissions control devices, such as the spark arrestor, muffler,
carburetor, etc.
FREQUENCY
Before each use
After each use
Every 10 hours
Every 25 hours
* If maintenance or replacement is required, have the unit serviced by an authorized service center.
MAINTENANCE
To avoid serious personal injury, always stop the engine and allow it to cool
Wear protective clothing and observe all safety instructions to prevent
MAINTENANCE REQUIRED
Check for loose screws, nuts or bolts (tighten as needed)
Check for damaged or worn parts*
Check the saw chain sharpness. Refer to Maintaining the Saw Chain.
Check the chain tension (adjust as needed). Refer to Adjusting the
Chain Tension.
Fill the chain oil reservoir (refill frequently). Refer to Adding Bar and
Chain Oil.
Clean the unit and inspect decals. Refer to Cleaning in the Cleaning
and Storage section.
Clean the guide bar groove and oil passages.
Clean and re-oil the air filter. Refer to Maintaining the Air Filter.
Check the spark plug condition and gap. Refer to Maintaining the
Spark Plug.
31

Publicidad

loading