Publicidad
Idiomas disponibles
Idiomas disponibles
Guide Bar Groove
ADJUSTING THE CHAIN TENSION
CAUTION:
saw chain is not properly tensioned. Maintaining proper chain tension will improve cutting
performance and prolong the life of the saw chain.
WARNING:
tension while the unit is running. Always stop the engine and allow it to cool. Disconnect
the spark plug wire to prevent the unit from starting accidentally.
WARNING:
when handling or performing maintenance on the saw chain.
Check the chain tension before and during operation. The saw chain will expand as it heats up during
operation. Adjust the chain tension whenever the flats on the saw chain hang out of the bar groove
(Fig. 18 & Fig. 21).
Drive Sprocket
Slot
The guide bar, saw chain, and saw bearings will wear more rapidly if the
To prevent serious injury, never touch the saw chain or adjust the chain
The saw chain is very sharp. Always wear heavy-duty protective gloves
Direction of Rotation
Fig. 16
Bar-Retaining Studs
Chain-Tensioning Pin and Pin Hole
Fig. 17
34
Cutter
Saw Chain Flat
Saw Chain
Guide Bar
Publicidad
