Publicidad
Idiomas disponibles
Idiomas disponibles
Lock Tab
ADJUSTING THE IDLE SPEED
WARNING:
clothing and observe all safety instructions to prevent serious personal injury.
If the engine will not idle properly:
1. Start the engine. Refer to Starting and Stopping.
2. Release the throttle control and let the engine idle.
NOTE: Make sure the choke lever is NOT engaged while adjusting the idle speed.
•
If the engine stops, increase the idle speed. Use a small Phillips screwdriver to turn the idle
speed screw clockwise, 1/8 of a turn at a time, until the engine idles smoothly (Fig. 27).
•
If the saw chain spins when the engine idles, reduce the idle speed. Turn the idle speed screw
counterclockwise, 1/8 of a turn at a time, until the saw chain stops moving (Fig. 27).
Idle Speed Screw
The saw chain may spin during idle speed adjustments. Wear protective
Fig. 26
Fig. 20
40
Air Filter
Cover Tab
Air Filter Cover
Publicidad
