Publicidad
Idiomas disponibles
Idiomas disponibles
PROBLEM
THE SAW CHAIN DOES NOT ROTATE
The saw chain tension is too tight
The guide bar and saw chain are assembled
incorrectly
The guide bar and saw chain are damaged
The drive assembly is damaged
THE SAW CHAIN ROTATES, BUT DOES NOT CUT
The saw chain is dull
The saw chain is on backwards
If further assistance is required, contact an authorized service center.
SOLUTION
Adjust the saw chain tension
Refer to Installing / Replacing the Saw Chain
Inspect the guide bar and saw chain for damage.
Replace them if necessary
Refer to Service information
Replace the saw chain or have it sharpened by an
authorized service dealer
Check and correct the saw chain direction
44
Publicidad
