Symbols - Ryobi RY29550 Manual Del Operador

Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper inter-
pretation of these symbols will allow you to operate the product better and safer.
SYMBOL
Safety Alert
V Volts
A Amperes
Hz Hertz
W Watt
min Minutes
Alternating Current
Direct Current
n o
No Load Speed
Class II Tool
.../min Per Minute
Wet Conditions Alert
Read the Operator's Manual
Wear Eye and Hearing Protec-
tion
Keep Bystanders Away
Ricochet
No Blade
Gasoline and Lubricant

SYMBOLS

NAME
Indicates a potential personal injury hazard.
Voltage
Current
Frequency (cycles per second)
Power
Time
Type of current
Type or a characteristic of current
Rotational speed, at no load
Double-insulated construction
Revolutions, strokes, surface speed, orbits etc., per minute
Do not expose to rain or use in damp locations.
To reduce the risk of injury, user must read and understand
operator's manual before using this product.
Wear eye protection which is marked to comply with ANSI Z87.1 as
well as hearing protection when operating this equipment.
Keep all bystanders at least 50 ft. away.
Thrown objects can ricochet and result in personal injury or prop-
erty damage.
Do not install or use any type of blade on a product displaying this
symbol.
Use unleaded gasoline intended for motor vehicle use with an
octane rating of 87 [(R + M) / 2] or higher. This product is powered
by a 2-cycle engine and requires pre-mixing gasoline and 2-cycle
lubricant.
5 — English
DESIgNATION/EXPLANATION