TECHNICAL DATA
EN
Model
Rated capacity
Min. height
Max. height
Lifting height with rated load
Actuating force of the handle
Number of users
Net weight
Note: The lifting range is without saddle rise.
FLOOR REACTION ON WHEELS UNDER RATED LOAD
Saddle in the upper position
Saddle in the lower position
SERVICING THE JACK AND ASSISTANCE IN THE EVENT OF FAULTS
ENSURE THAT YOU TAKE ADEQUATE PROTECTIVE MEASURES WHEN
USING THE JACK (HANDS, ARMS, ETC.)
- Bleed the hydraulic unit once per year (see section on this topic).
- Check that the nuts are tight.
Problems and
symptoms
The jack cannot lift
the load.
The jack cannot hold
the load.
45
2445254/NO0039
3000 kg
145mm
500mm
340~500mm
450N
2
37.2kg
Stationary wheels
12120 N
7210 N
Likely causes and solutions
1. The safely valve is not fully closed.
- Turn the valve to the right until tightened.
2. The oil level is too low:
- Arrange for the jack to be inspected by a tech-
nician. When filling oil, both the properties of the
hydraulic fluid and the quantity must be observed.
3. See 1 above.
4. The hydraulic system is dirty.
Rotating wheels
2880 N
7790 N