Medisana 40422 Instrucciones De Manejo página 7

Select "Personal Settings". Enter
5
your personal settings and touch
"Save" when you're finished. This
will bring you back to the start
menu.
The scales appear after the
9
beep in the menu "My devices"
in the app.
D) Weight measurement using your smartphone and the VitaDock+ app
Start the app.
1
In the course of continuous product optimisation, we reserve the right to regularly update the VitaDock+ app.
Therefore, we recommend that you periodically perform an update. The included images serve only as a reference.
BS 430 CONNECT
BS 440 CONNECT
Tap the symbol "Ξ" top left again,
6
now select "Weight" and enter
your information. Finally click on
"Save".
IMPORTANT: Enter a personal
target weight. The selected
profile in the app must also
agree with the scales (cf.
section B).
Now select the blue button
10
"Connect" beside the "Medisana
Analysis Scales" displayed.
Note: If the scales are already
paired with your mobile device,
the button will be green.
Stand on the scales barefoot
2
and carry out a complete mea-
surement (confirmed at the end
by a beep).
Instruction Manual GB
Now select the symbol "⊕". on
7
the top right. This will bring you
to the menu "My devices".
The measurement data are
11
automatically transfered to and
stored by the app VitaDock+.
The display shows the following
3
measurements:
• Weight
• Proportion body fat
• Proportion body water
• Proportion muscle mass
• Bone mass
• BMR (calory requirement)
• BMI
To establish a connection be-
8
tween smart phone / tablet and
scales press the SET button and
select your memory location,
which you defined in step
.
6
Stand on the scales barefoot
(without socks or similar) and
carry out a complete measure-
ment (confirmed at the end by a
beep).
Note: If the measurement
data was not transferred to
the app, repeat the measure-
ment.
Note: A stable internet con-
nection is required to synchro-
nise the scales with the app.
Now select the symbol "⊕" on
4
the top right in the app. Now se-
lect the green button "Connect"
beside the "Medisana Analysis
Scales" displayed.
The measurement data are
5
automatically transfered to and
stored by the app.
7