Publicidad
Idiomas disponibles
Idiomas disponibles
Mount the Camera
Installation Tips
• Do not face the camera towards any light sources.
• Do not point the camera towards a glass window. Or, it may result in
poor image quality because of the window glare by spotlights,
ambient lights or status lights.
• Do not place the camera in a shaded area and point it towards a
well-lit area. Or, it may result in poor image quality. To ensure best image
quality, the lighting condition for both the camera and the capture object
shall be the same.
• To ensure better image quality, it's recommended to clean the lens with
a soft cloth from time to time.
• Make sure the power ports are not directly exposed to water or
moisture and not blocked by dirt or other elements.
• With IP waterproof ratings, the camera can work properly under
conditions like rain and snow. However, it doesn't mean the camera can
work underwater.
• Do not install the camera at places where rain and snow can hit the lens
directly.
• The camera may work in extreme cold conditions as low as -25°C.
Because when it is powered on, the camera will produce heat. You may
power on the camera indoors for a few minutes before installing it
outdoors.
7
Install the Camera
1
2
1
3
5
OFF
ON
eSATA
Hold and press on the camera top
and turn anticlockwise to separate
mounting plate from the camera.
Drill holes according to the
mounting hole template and
screw the mounting plate to the
mounting holes on the ceiling.
NOTE: Use the drywall anchors
included in the package if needed.
7
1
2
8
Publicidad
