Mount The Camera - Reolink Argus 3 Instrucciones Operativas

1. Please charge the rechargeable battery with a standard and high-quality DC 5V or 9V battery
charger.
2. Please note that the battery is ONLY compatible with the Reolink solar panel. You cannot charge
the battery with solar panels from any other brands.
3. Please charge the battery when temperatures are between 0°C and 40°C.
4. Always use the battery when temperatures are between -20°C and 60°C.
5. Please keep the USB charging port dry, clean and free of any debris and make sure the battery
contacts are aligned.
6. Please cover the USB charging port with the rubber cover when the battery is fully charged.
7. Do not charge, use or store the battery near any ignition sources, such as fire or heaters.
8. Do keep the battery away from children.
9. Do NOT disassemble, cut, puncture, short-circuit the battery, or dispose of the battery in water,
fire, microwave ovens and pressure vessels.
10. Do NOT use the battery if it gives off an odor, generates heat, becomes discolored or deformed,
or appears abnormal in any way. If the battery is being used or charged, remove the battery from
the device or the charger immediately and stop using it.
11. Always follow the local waste and recycle laws when you get rid of the used battery.
9 English
Mounting the Camera
• with Magnet
Step 1 Step 2
Drill holes in accordance with the mounting hole template
Rotate to separate parts of
and screw the security mount to the wall. If you are
the bracket.
mounting the camera to a masonry or on any other hard
surface, remember to insert the plastic anchors into the hole.
Screw the base of the camera bracket onto the wall and
then attach the other part of the bracket onto the base.
Step 3
Screw the magnet to the camera.
English 10