Mount The Camera; Installation Tips - Reolink TrackMix Manual De Instrucciones

Mount the Camera

Installation Tips

• Do not face the camera towards any light sources.
• Do not point the camera towards a glass window. Otherwise, it may
result in poor image quality because of the window glare caused by
infrared LEDs, ambient lights or status lights.
• Do not place the camera in a shaded area and point it towards a
well-lit area. Otherwise, it may result in poor image quality. To ensure
best image quality, the lighting condition for both the camera and the
capture object should be the same.
• To ensure better image quality, it's recommended to clean the dome
cover with a soft cloth from time to time.
• Make sure the power ports are not directly exposed to water or
moisture and not blocked by dirt or other elements.
• The waterproof camera can work properly under conditions like rain
and snow. However, it doesn't mean the camera can work underwater.
• Do not install the camera at places where rain and snow can hit the lens
directly.
• The camera may work in extreme cold conditions as low as -25°C.
Because when it is powered on, the camera will produce heat. You may
power on the camera indoors for a few minutes before installing it
outdoors.
9 English
Mount the camera to the wall
2
3
1. Drill holes in accordance with the mounting hole template.
2. Install the mount base with screws included in the package.
3. To adjust the camera direction, you may control the camera to pan
and tilt via Reolink App or Client.
NOTE: Use the drywall anchors included in the package if needed.
1
English 10