General Introduction; Install The Rechargeable Battery To The Camera - Reolink Argus 2 Manual Del Usuario

General Introduction

Micro SD Card Slot
Reset Hole
Press the reset button with a
pin to restore factory settings.
Daylight Sensor
Lens
Status LED
Built-in Mic
Built-in PIR Motion Sensor
Speaker
Wall Mount
Only for Argus 2
The LED in Red (WiFi connection failed)
Blinking: Standby status
On: Working status
2 English
The LED in Blue (WiFi connection succeeded)
Blinking: Standby status
On: Working status

Install the Rechargeable Battery to the Camera

!
• Please press the button (on the top of the back casing), and slide the back casing
downward to close it. The button also needs to be closed firmly for good weatherproof
performance.
• For the weatherproof performance, always cover the USB charging port with the rubber
plug.
English 3