Urmet VOG 7 1760 Manual De Uso página 14

1. GESTURE COMMANDS
The video door phone Ref. 1760/31 - /33 allows the activation of some of the video door phone functions
through gesture commands. By moving your hand in front of the IR Sensor it is possible, for example, to
answer a call or open the pedestrian door without pressing the keys on the display.
To use gesture commands, enable the function in the video door phone configuration menu (refer to
chapter Abilitazione comandi gestuali).
After enabling the function in the upper bar of the display, the icon
To activate functions that require more that 1 hand movement, the next movement has to be made within
1 second from the previous one.
Below are the instructions for using the gesture commands to activate the functions.
1.1 SWITCHING ON THE DISPLAY
• Make a pass with the hand when the video door phone is in the idle state.
1.2 VOICE ACTIVATION
It is possible to activate voice mode in the following 2 ways:
1. Waiting for a response (while receiving a call)
• Pass your hand twice while the video door phone receives a call, the display shows the following
screen and highlights the voice activation icon.
• After a few seconds, communication with the caller is established.
1
Sensore IR
14
<1 s
<1 s
2
BEEP
is shown.
<2 s
<1 s
3
BEEP
4
DS1760-036