Makita DCL282F Manual De Instrucciones página 10

4. Overlap the frame of dust stopper with that of the paper filter.
Fig.18
5. Place the dust stopper and the paper filter together into the
cleaner cavity in the same direction of arrow on the dust stopper.
Insert them all the way into the slots in the cleaner cavity.
Fig.19
6. Spread the container part of the paper filter inside the cleaner.
Fig.20
7. Close the front cover completely.
1
Fig.21
► 1. Front cover
OPERATION
CAUTION:
Do not move your face close to
the air vent when operating the cleaner. If foreign
objects are blown into eyes, it may result in personal
injury.
Installing or removing the cleaner
attachment
CAUTION:
After installing attachment,
check if it is securely installed. If the attachment
is installed imperfectly, it may come off and cause
personal injury.
CAUTION:
Be careful not to hit your hand on
the wall etc. when removing the attachment.
When using attachment with lock function
To install attachment, insert it to the suction inlet of the
cleaner until it clicks. Make sure that the attachment is
locked.
3
Fig.22
► 1. Suction inlet 2. Attachment with lock function
3. Hook
NOTE: When installing the attachment with lock
function, be sure to align the release button with
the hook on the attachment. If they are not aligned,
the wand will not be locked and may come off from
the cleaner.
To remove, pull the attachment while pushing the
release button.
1
Fig.23
► 1. Release button 2. Attachment with lock function
10 ENGLISH
1
2
2